Mercury MerCruiser 5.7 L 350 V8 Marine Engine 411 Hours Used
Mercury MerCruiser's exclusive Turn Key Starting system is standard on all carbureted engines. This patented feature eliminates the hassle of starting a cold engine. Simply turn the key. No choke, no pumping or priming required. This means that the entire Mercury MerCruiser gas line-up features Turn Key Starting. No other engine manufacturer can match that. The ideal repower for your inboard cruiser up to 34'. A quality fuel injected inboard engine to replace any make of 5.7L, 6.0L, 6.2L, or 7.4L
$5,155.00
Mercury MerCruiser 5.7 L 350 V8 Marine Engine 411 Hours Used
Key Features
Thunderbolt V Hi-Energy Ignition and platinum-tipped spark plugs ensure reliable starts
Dry-joint exhaust eliminates the chance for water to enter engine through leaky gaskets
Water-separating fuel filter helps protect fuel system and engine against damage
Industry-exclusive 3-year limited corrosion failure warranty
Proven GM cast iron block V6 or V8 power for years of reliable operation
Ceramic coated exhaust elbows resist temperature and corrosion for long life
Serpentine belt system for longer belt life
Dual Plane intake manifold for improved fuel atomization means more power & torque
Revised fuel calibration for more crisp acceleration and improved running quality
Specifications :
HP / kW @ flywheel
300 / 224
Full throttle range
4400 - 4800
Engine type
Quicksilver Iron Heads using screw in rocker studs, black x-valves and hardened valve seats
Displacement (CID/L)
350 CID (5.7L)
Bore and stroke
4.00” x 3.48” (102mm x 88mm)
Compression ratio
9.4:1 with cast alloy Pistons
Fuel requirement
87 Octane (R M)/2
Fuel delivery system
MPI w/ Gen II cool fuel
Induction system
2-piece long runner intake with 75mm throttle body
Ignition system
Crank fired high voltage switch w/ knock control
Charging system
65 Amp / 917 Watt Alternator
Water drain system
single point air-actuated water drain with flush port
Exhaust system
Iron Manifold with dry-Joint Exhaust manifold
Cooling system
full closed cooling system - manifolds included
Accessory drive system
Serpentine Belt
Lubrication system
High Flow Oil Pump
Recommended oil
SAE 25-40 NMMA Certified FC-W Synthetic Blend
Audio warning system
Oil Pressure, Coolant Temperature, Transmission temperature, water temperature
Compatible Transmissions
ZF 63A, ZF 63IV, ZF 80A, VD 5000A, 5000V, VD 72C, ZF 63F
Dimensions (L x W x H)
43” x 30” x 22” (1092mm x 740mm x 559mm)
Weight (engine only)
980 lbs.
Boat harness type
10-pin
Also you can check product : Mercury Verado 400 L6 800 Hours XL Outboard Engine White Used
Key Features
Thunderbolt V Hi-Energy Ignition and platinum-tipped spark plugs ensure reliable starts
Dry-joint exhaust eliminates the chance for water to enter engine through leaky gaskets
Water-separating fuel filter helps protect fuel system and engine against damage
Industry-exclusive 3-year limited corrosion failure warranty
Proven GM cast iron block V6 or V8 power for years of reliable operation
Ceramic coated exhaust elbows resist temperature and corrosion for long life
Serpentine belt system for longer belt life
Dual Plane intake manifold for improved fuel atomization means more power & torque
Revised fuel calibration for more crisp acceleration and improved running quality
Specifications :
HP / kW @ flywheel
300 / 224
Full throttle range
4400 - 4800
Engine type
Quicksilver Iron Heads using screw in rocker studs, black x-valves and hardened valve seats
Displacement (CID/L)
350 CID (5.7L)
Bore and stroke
4.00” x 3.48” (102mm x 88mm)
Compression ratio
9.4:1 with cast alloy Pistons
Fuel requirement
87 Octane (R M)/2
Fuel delivery system
MPI w/ Gen II cool fuel
Induction system
2-piece long runner intake with 75mm throttle body
Ignition system
Crank fired high voltage switch w/ knock control
Charging system
65 Amp / 917 Watt Alternator
Water drain system
single point air-actuated water drain with flush port
Exhaust system
Iron Manifold with dry-Joint Exhaust manifold
Cooling system
full closed cooling system - manifolds included
Accessory drive system
Serpentine Belt
Lubrication system
High Flow Oil Pump
Recommended oil
SAE 25-40 NMMA Certified FC-W Synthetic Blend
Audio warning system
Oil Pressure, Coolant Temperature, Transmission temperature, water temperature
Compatible Transmissions
ZF 63A, ZF 63IV, ZF 80A, VD 5000A, 5000V, VD 72C, ZF 63F
Dimensions (L x W x H)
43” x 30” x 22” (1092mm x 740mm x 559mm)
Weight (engine only)
980 lbs.
Boat harness type
10-pin
Also you can check product : Mercury Verado 400 L6 800 Hours XL Outboard Engine White Used
- Availability: 4 In Stock
- Model: MerCruiser 5.7 L V8
-
Brand:
