Marine Gearbox
The gearbox on a marine diesel engine has three purposes: to reduce the maximum speed at which the propeller rotates; to enable both forward and astern rotation of the propeller; and to enable the propeller to remain stationary when the engine is running. Unlike a car gearbox, there is usually only one forward gear and the clutch is contained within the gearbox.
Because modern engines run at too high a speed for normal operation of the propeller, gearing reduction is required. The reduction gear ratio is usually between 2:1 and 3:1, with different manufacturers often using differing ratios.
Because modern engines run at too high a speed for normal operation of the propeller, gearing reduction is required. The reduction gear ratio is usually between 2:1 and 3:1, with different manufacturers often using differing ratios.
Experience the unmatched quality and performance of the Kanzaki KM35P transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures. The Kanzaki KM35P transmission is your ideal companion for reliable and powerful boating.
New KM2P-1 marine transmission. Manufactured by Kanzaki in Japan. Gear ratio is 2.62:1. Comes painted Yanmar gray. Was originally installed onto a Yanmar engine and removed by the factory. Does not come with any accessories. This transmission full warranty support. Commonly used on Yanmar 2GM20, 2YM20, and 3YM30 marine diesel engines.
Experience the unmatched quality and performance of the Kanzaki KM4A-2, 2.14 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures. The Kanzaki KM4A-2, 2.14 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM4A-2, 2.14 transmission.
The Kanzaki KM40A, 2.45 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM40A, 2.45 transmission. Experience the unmatched quality and performance of the Kanzaki KM40A, 2.45 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
The Kanzaki KM50A, 2.43 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM50A, 2.43 transmission. Designed with advanced features and built with precision, the KMH50A transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Perfect for new installations as well! If you are putting in a new Yanmar, Cummins Caterpillar, John Deere, Detroit Diesel or any other marine engine look seriously at these units. The 8 Degree down angle and 5.75 inch drop down, keeps the front of the motor down for tight installations.
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. ZF 25 Gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Fully works tested, reliable and simple to install. Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running.
Reverse reduction marine transmission with mechanically actuated multi-disc clutches. ZF 30 M gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Robust design also withstands continuous duty in workboat applications. Output shaft thrust bearing designed to take maximum propeller thrust. Fully works tested, reliable, sea water resistant, simple to install, compact and space saving design.
Lightweight and robust aluminum alloy casing (sea water resistant).Case hardened and precisely ground gear teeth for long life and smooth running. Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running. Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Replaceable oil filter cartridge.Manufacture, design and quality control standards comply with ISO 9001.
ZF / Hurth is one of the largest manufacturers of gearboxes. The company operates a total of 121 production companies in 26 countries different countries. We can deliver a ZF / Hurth ZF 68 gearbox with 2 years warranty. Fully works tested, reliable and simple to install, Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing propellers, as applicable.
Kanzaki KM35P Marine Transmission Ratio 2.61:1- Gearbox New (KM35P)
The Kanzaki KM35P transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM35P transmission.
Experience the unmatched quality and performance of the Kanzaki KM35P transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Kanzaki KM35P Transmission with ratio 1:2.36 Compatible with engine: 3JH5E / 3JH40 / 4JH5E / 4JH45 / 4JH57
Specifications
Specifications
Clutch type
Mechanical servo cone clutch (Parallel drive)
Input torque (N・m)
129 (@3,800rpm)
Reduction ratio (Forward)
2.36:1 2.61:1
Reduction ratio (Reverce)
3.16:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise (Forward)
Anticlockwise
(Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
0.5
Weight (Dry) (kg)
12
Standard flange
SAE #5 (Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Kanzaki KM2P-1 Marine Transmission Ration 2.62:1- Gearbox New
Experience the unmatched quality and performance of the Kanzaki KM35P transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Kanzaki KM35P Transmission with ratio 1:2.36 Compatible with engine: 3JH5E / 3JH40 / 4JH5E / 4JH45 / 4JH57
Specifications
Specifications
Clutch type
Mechanical servo cone clutch (Parallel drive)
Input torque (N・m)
129 (@3,800rpm)
Reduction ratio (Forward)
2.36:1 2.61:1
Reduction ratio (Reverce)
3.16:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise (Forward)
Anticlockwise
(Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
0.5
Weight (Dry) (kg)
12
Standard flange
SAE #5 (Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Kanzaki KM2P-1 Marine Transmission Ration 2.62:1- Gearbox New
Experience the unmatched quality and performance of the Kanzaki KM35P transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures. The Kanzaki KM35P transmission is your ideal companion for reliable and powerful boating.
Kanzaki KM2P-1 Marine Transmission Ratio 2.62:1- Gearbox New (KM2P-1)
New Yanmar KM2P-1 marine transmission. Manufactured by Kanzaki in Japan. Gear ratio is 2.62:1. Comes painted Yanmar gray. Was originally installed onto a Yanmar engine and removed by the factory. Does not come with any accessories.
This transmission is sold by an official dealer with full warranty support. Commonly used on Yanmar 2GM20, 2YM20, and 3YM30 marine diesel engines.
Important Guidelines
To improve transmission longevity and preserve the warranty, please follow these guidelines when installing and running your new transmission:
Oil Cooler
For transmissions that use an oil cooler, it is important to have it serviced or buy a new one (and flush the oil lines). If there had ever been water, metal particles, or other debris in the old transmission oil, or the old transmission failed or was slipping, reusing an old oil cooler can cause debris to enter the new transmission through the cooler circuit, which can void the warranty and lead to premature failure.
Specifications :
Clutch type
Mechanical servo cone clutch (Parallel drive)
Input torque (N・m)
66 (@3,800rpm)
Reduction ratio (Forward)
2.21:1 2.62:1 3.22:1
Reduction ratio (Reverce)
3.06:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise (Forward)
Anticlockwise
(Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
0.3
Weight (Dry) (kg)
9.8
Standard flange
SAE #6
(Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Yanmar 3YM20 21HP Inboard Diesel Engine - Used
This transmission is sold by an official dealer with full warranty support. Commonly used on Yanmar 2GM20, 2YM20, and 3YM30 marine diesel engines.
Important Guidelines
To improve transmission longevity and preserve the warranty, please follow these guidelines when installing and running your new transmission:
Oil Cooler
For transmissions that use an oil cooler, it is important to have it serviced or buy a new one (and flush the oil lines). If there had ever been water, metal particles, or other debris in the old transmission oil, or the old transmission failed or was slipping, reusing an old oil cooler can cause debris to enter the new transmission through the cooler circuit, which can void the warranty and lead to premature failure.
Specifications :
Clutch type
Mechanical servo cone clutch (Parallel drive)
Input torque (N・m)
66 (@3,800rpm)
Reduction ratio (Forward)
2.21:1 2.62:1 3.22:1
Reduction ratio (Reverce)
3.06:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise (Forward)
Anticlockwise
(Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
0.3
Weight (Dry) (kg)
9.8
Standard flange
SAE #6
(Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Yanmar 3YM20 21HP Inboard Diesel Engine - Used
New KM2P-1 marine transmission. Manufactured by Kanzaki in Japan. Gear ratio is 2.62:1. Comes painted Yanmar gray. Was originally installed onto a Yanmar engine and removed by the factory. Does not come with any accessories. This transmission full warranty support. Commonly used on Yanmar 2GM20, 2YM20, and 3YM30 marine diesel engines.
Kanzaki KM4A-2 Marine Transmission Ratio 2.63:1- Gearbox New (KM4A-2)
Experience the unmatched quality and performance of the Kanzaki KM4A-2, 2.14 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
The Kanzaki KM4A-2, 2.14 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM4A-2, 2.14 transmission.
Specifications :
Clutch type
Mechanical servo cone clutch (Angle drive)
Input torque (N・m)
241 (@3,200rpm)
Reduction ratio (Forward)
1.47:1 2.14:1 2.63:1
Reduction ratio (Reverce)
1.47:1 2.14:1 2.63:1
Input rotation
Anticlockwise
Output rotation
(from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
3
Weight (Dry) (kg)
28.5
Standard flange
SAE #4 (Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Kanzaki KM35P Marine Transmission Ratio 2.61:1- Gearbox New
The Kanzaki KM4A-2, 2.14 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM4A-2, 2.14 transmission.
Specifications :
Clutch type
Mechanical servo cone clutch (Angle drive)
Input torque (N・m)
241 (@3,200rpm)
Reduction ratio (Forward)
1.47:1 2.14:1 2.63:1
Reduction ratio (Reverce)
1.47:1 2.14:1 2.63:1
Input rotation
Anticlockwise
Output rotation
(from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #20/#30 (Single Grade)
Oil capacity(L)
3
Weight (Dry) (kg)
28.5
Standard flange
SAE #4 (Option: Borg Warner flange will be available for any other SAE flange)
Also you can check product : Kanzaki KM35P Marine Transmission Ratio 2.61:1- Gearbox New
Experience the unmatched quality and performance of the Kanzaki KM4A-2, 2.14 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures. The Kanzaki KM4A-2, 2.14 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM4A-2, 2.14 transmission.
Kanzaki KMH40A Marine Transmission Ratio 2.45:1- Gearbox New (KMH40A)
The Kanzaki KM40A, 2.45 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM40A, 2.45 transmission.
Experience the unmatched quality and performance of the Kanzaki KM40A, 2.45 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Specifications :
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
457 (@5,500rpm)
Reduction ratio (Forward)
1.24:1 1.53:1 2.04:1 2.45:1
Reduction ratio (Reverce)
1.24:1 1.53:1 2.04:1 2.45:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
1.7
Weight (Dry) (kg)
29.5
Standard flange
Borg Warner (Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KM4A-2 Marine Transmission Ratio 2.63:1- Gearbox New
Experience the unmatched quality and performance of the Kanzaki KM40A, 2.45 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Specifications :
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
457 (@5,500rpm)
Reduction ratio (Forward)
1.24:1 1.53:1 2.04:1 2.45:1
Reduction ratio (Reverce)
1.24:1 1.53:1 2.04:1 2.45:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
1.7
Weight (Dry) (kg)
29.5
Standard flange
Borg Warner (Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KM4A-2 Marine Transmission Ratio 2.63:1- Gearbox New
The Kanzaki KM40A, 2.45 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM40A, 2.45 transmission. Experience the unmatched quality and performance of the Kanzaki KM40A, 2.45 transmission. Designed with advanced features and built with precision, this transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Kanzaki KMH50A Marine Transmission Ratio 2.43:1- Gearbox New (KMH50A)
The Kanzaki KM50A, 2.43 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM50A, 2.43 transmission.
Designed with advanced features and built with precision, the KMH50A transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Specifications
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
660 (@5,500rpm)
Reduction ratio (Forward)
1.67:1 2.13:1 2.43:1
Reduction ratio (Reverce)
1.67:1 2.13:1 2.43:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
1.8
Weight (Dry) (kg)
43
Standard flange
Borg Warner(Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KMH40A Marine Transmission Ratio 2.45:1- Gearbox New
Designed with advanced features and built with precision, the KMH50A transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Specifications
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
660 (@5,500rpm)
Reduction ratio (Forward)
1.67:1 2.13:1 2.43:1
Reduction ratio (Reverce)
1.67:1 2.13:1 2.43:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
1.8
Weight (Dry) (kg)
43
Standard flange
Borg Warner(Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KMH40A Marine Transmission Ratio 2.45:1- Gearbox New
The Kanzaki KM50A, 2.43 transmission is your ideal companion for reliable and powerful boating. Built with attention to detail and high-quality materials, it ensures a smooth and enjoyable experience on the water. Elevate your boating adventures with the durability and performance of the Kanzaki KM50A, 2.43 transmission. Designed with advanced features and built with precision, the KMH50A transmission offers a perfect blend of power, efficiency, and reliability for your boating adventures.
Kanzaki KMH61A Marine Transmission Ratio 2.04:1- Gearbox New (KMH61A)
Perfect for new installations as well! If you are putting in a new Yanmar, Cummins Caterpillar, John Deere, Detroit Diesel or any other marine engine look seriously at these units. The 8 Degree down angle and 5.75 inch drop down, keeps the front of the motor down for tight installations.
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
1,070 (@5,500rpm)
Reduction ratio (Forward)
1.55:1 2.04:1 2.43:1
Reduction ratio (Reverce)
1.55:1 2.04:1 2.43:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
2.8
Weight (Dry) (kg)
58
Standard flange
Borg Warner (Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KMH50A Marine Transmission Ratio 2.43:1- Gearbox New
Clutch type
Wet multiple-disc clutch (Angle drive)
Input torque (N・m)
1,070 (@5,500rpm)
Reduction ratio (Forward)
1.55:1 2.04:1 2.43:1
Reduction ratio (Reverce)
1.55:1 2.04:1 2.43:1
Input rotation
Anticlockwise
Output rotation (from the stern)
Clockwise or Anticlockwise (Forward)
Anticlockwise or Clockwise (Reverce)
Oil(L)
SAE #30 (Single Grade)
Oil capacity(L)
2.8
Weight (Dry) (kg)
58
Standard flange
Borg Warner (Option: Available for any other SAE flange)
Option
electric / mechanical trolling, electric servo, PTO
Also you can check product : Kanzaki KMH50A Marine Transmission Ratio 2.43:1- Gearbox New
Perfect for new installations as well! If you are putting in a new Yanmar, Cummins Caterpillar, John Deere, Detroit Diesel or any other marine engine look seriously at these units. The 8 Degree down angle and 5.75 inch drop down, keeps the front of the motor down for tight installations.
ZF 25 Marine Transmission Ratio 2.8 : 1 (HSW 250 H) Gearbox New (ZF 25)
ZF 25 Gearbox
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. ZF 25 Gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Fully works tested, reliable and simple to install.
Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Replaceable oil filter cartridge.
Manufacture, design and quality control standards comply with ISO 9001.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
52.9 lbs
Manufacturer
ZF
Manufacturer #
3315002010
Material
Aluminum
Model
25
Part #
3315002010
Product Type
Boat Transmission, No Down Angle, 0 Degree
Replaces
ZF 25, Hurth HSW250H
Shipping Dims
16" x 16" x 16"
Shipping Wt
72 lbs
Size
Gear Ratio: 2.8:1
UPC
443590351525
Warranty
2 Year (1 Year Commercial)
Also you can check product : Kanzaki KMH61A Marine Transmission Ratio 2.04:1- Gearbox New
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. ZF 25 Gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Fully works tested, reliable and simple to install.
Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Replaceable oil filter cartridge.
Manufacture, design and quality control standards comply with ISO 9001.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
52.9 lbs
Manufacturer
ZF
Manufacturer #
3315002010
Material
Aluminum
Model
25
Part #
3315002010
Product Type
Boat Transmission, No Down Angle, 0 Degree
Replaces
ZF 25, Hurth HSW250H
Shipping Dims
16" x 16" x 16"
Shipping Wt
72 lbs
Size
Gear Ratio: 2.8:1
UPC
443590351525
Warranty
2 Year (1 Year Commercial)
Also you can check product : Kanzaki KMH61A Marine Transmission Ratio 2.04:1- Gearbox New
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. ZF 25 Gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Fully works tested, reliable and simple to install. Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running.
ZF 30M Marine Transmission Ratio 2.7 : 1 Gearbox New (ZF 30M)
ZF 30 M
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust.
Compact, space saving design.
Oil cooler always necessary.
ZF 30 M Options
Engine-matched torsional coupling.
SAE 4 or SAE 5 bell housings.
Oil cooler.
Control cable bracket for mounting of push-pull cable to the control lever.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
50.5 lbs
Manufacturer
ZF
Manufacturer #
3320002001
Material
Aluminum
Model
30M
Part #
3320002001
Product Type
Boat Transmission, No Down Angle, 0 Degree
Replaces
ZF 30M
Shipping Dims
16" x 16" x 16"
Shipping Wt
61 lbs
Size
Gear Ratio: 2.7:1
UPC
443590351549
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 25A Marine Transmission Ratio 2.8 : 1 HSW250A Gearbox New
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust.
Compact, space saving design.
Oil cooler always necessary.
ZF 30 M Options
Engine-matched torsional coupling.
SAE 4 or SAE 5 bell housings.
Oil cooler.
Control cable bracket for mounting of push-pull cable to the control lever.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
50.5 lbs
Manufacturer
ZF
Manufacturer #
3320002001
Material
Aluminum
Model
30M
Part #
3320002001
Product Type
Boat Transmission, No Down Angle, 0 Degree
Replaces
ZF 30M
Shipping Dims
16" x 16" x 16"
Shipping Wt
61 lbs
Size
Gear Ratio: 2.7:1
UPC
443590351549
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 25A Marine Transmission Ratio 2.8 : 1 HSW250A Gearbox New
Reverse reduction marine transmission with mechanically actuated multi-disc clutches. ZF 30 M gearbox is suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc. Robust design also withstands continuous duty in workboat applications. Output shaft thrust bearing designed to take maximum propeller thrust. Fully works tested, reliable, sea water resistant, simple to install, compact and space saving design.
ZF 25A Marine Transmission Ratio 2.8 : 1 HSW250A Gearbox New ( ZF 25A)
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications in luxury motoryachts, sport fishers, express cruisers etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing propellers, as applicable.
Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
Replaceable oil filter cartridge.
Compact, space saving design due to 8° down-angle and beveloid gear principle.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
52.9 lbs
Manufacturer
ZF
Manufacturer #
3315001018
Material
Aluminum
Model
25A
Part #
3315001018
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 25A, Hurth HSW 250A
Shipping Dims
16" x 16" x 16"
Shipping Wt
72 lbs
Size
Gear Ratio: 2.7:1
UPC
443590351518
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 25 Marine Transmission Ratio 2.8 : 1 (HSW 250 H) Gearbox New
Suitable for high performance applications in luxury motoryachts, sport fishers, express cruisers etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing propellers, as applicable.
Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
Replaceable oil filter cartridge.
Compact, space saving design due to 8° down-angle and beveloid gear principle.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
52.9 lbs
Manufacturer
ZF
Manufacturer #
3315001018
Material
Aluminum
Model
25A
Part #
3315001018
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 25A, Hurth HSW 250A
Shipping Dims
16" x 16" x 16"
Shipping Wt
72 lbs
Size
Gear Ratio: 2.7:1
UPC
443590351518
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 25 Marine Transmission Ratio 2.8 : 1 (HSW 250 H) Gearbox New
Lightweight and robust aluminum alloy casing (sea water resistant).Case hardened and precisely ground gear teeth for long life and smooth running. Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
ZF 45A Marine Transmission Hurth HSW450A Gearbox New (ZF 45A)
ZF 45 A Description
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including water jets and surface piercing propellers, as applicable.
ZF 45 A Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
B/W connection integrated with casing.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
Replaceable oil filter cartridge.
Compact, space saving design due to 8° down-angle and beveloid gear principle.
"SUPERSHIFT" clutch control.
ZF 45 A Options
Engine-matched dual stage coupling.
SAE 3 and SAE 4 bell housings.
Oil cooler complete with fittings and flexible oil hoses.
Mounting brackets.
Propeller shaft flange.
Control cable bracket for mounting of push-pull cable to the control lever.
Classification by all major Classification Societies on request.
SAE «A» Power Take Off.
Thermostatic valve for better performance of trolling valve in cold sea water.
Trolling valve (mechanical) for slow-speed drive.
Electric Trolling.
Supershift (with Autotroll and Easidock).
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
65.5 lbs
Manufacturer
ZF
Manufacturer #
3311001016
Material
Aluminum
Model
45A
Part #
3311001016
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 45A, Hurth HSW450A
Shipping Dims
20" x 20" x 20"
Shipping Wt
86 lbs
Size
Gear Ratio: 2.0:1
UPC
443590351099
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 30M Marine Transmission Ratio 2.7 : 1 Gearbox New
Reverse reduction marine transmission with mechanically actuated multi-disc clutches.
Suitable for high performance applications in luxury sailboats, motoryachts, fishing boats, etc.
Robust design also withstands continuous duty in workboat applications.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including water jets and surface piercing propellers, as applicable.
ZF 45 A Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
B/W connection integrated with casing.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same ratio and torque capacity in ahead or astern mode).
Replaceable oil filter cartridge.
Compact, space saving design due to 8° down-angle and beveloid gear principle.
"SUPERSHIFT" clutch control.
ZF 45 A Options
Engine-matched dual stage coupling.
SAE 3 and SAE 4 bell housings.
Oil cooler complete with fittings and flexible oil hoses.
Mounting brackets.
Propeller shaft flange.
Control cable bracket for mounting of push-pull cable to the control lever.
Classification by all major Classification Societies on request.
SAE «A» Power Take Off.
Thermostatic valve for better performance of trolling valve in cold sea water.
Trolling valve (mechanical) for slow-speed drive.
Electric Trolling.
Supershift (with Autotroll and Easidock).
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
65.5 lbs
Manufacturer
ZF
Manufacturer #
3311001016
Material
Aluminum
Model
45A
Part #
3311001016
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 45A, Hurth HSW450A
Shipping Dims
20" x 20" x 20"
Shipping Wt
86 lbs
Size
Gear Ratio: 2.0:1
UPC
443590351099
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 30M Marine Transmission Ratio 2.7 : 1 Gearbox New
Lightweight and robust aluminum alloy casing (sea water resistant). Case hardened and precisely ground gear teeth for long life and smooth running. Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead. Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable. Replaceable oil filter cartridge.Manufacture, design and quality control standards comply with ISO 9001.
ZF 68 Marine Transmission 63 Hurth HSW630H1 Gearbox New (ZF 68)
ZF 68 Description
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches.
Suitable for high performance applications in motoryachts, sport fishers, express cruisers etc.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including water jets and surface piercing propellers, as applicable.
ZF 68 Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
B/W connection integrated with casing.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same torque capacity in ahead or astern mode. Reduction Ratios in ahead orastern are very close).
Replaceable oil filter cartridge.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
99.5 lbs
Manufacturer
ZF
Manufacturer #
3312002201
Material
Aluminum
Model
45A
Part #
3312002201
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 68, 63, HSW630H1
Shipping Dims
20" x 20" x 20"
Shipping Wt
122 lbs
Size
Gear Ratio: 1.3:1
UPC
443590351266
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 45A Marine Transmission Hurth HSW450A Gearbox New
Reverse reduction marine transmission with hydraulically actuated multi-disc clutches.
Suitable for high performance applications in motoryachts, sport fishers, express cruisers etc.
Fully works tested, reliable and simple to install.
Design, manufacture and quality control standards comply with ISO 9001.
Compatible with all types of engines and propulsion systems, including water jets and surface piercing propellers, as applicable.
ZF 68 Features
Lightweight and robust aluminum alloy casing (sea water resistant).
Case hardened and precisely ground gear teeth for long life and smooth running.
Output shaft thrust bearing designed to take maximum propeller thrust astern and ahead.
B/W connection integrated with casing.
Smooth and reliable hydraulic shifting with control lever for attachment of push-pull cable.
Suitable for twin engine installations (same torque capacity in ahead or astern mode. Reduction Ratios in ahead orastern are very close).
Replaceable oil filter cartridge.
SPECS :
Brand
ZF
Color
Unpainted
Made In
Italy
Fits
Mechanical Shift
Item Weight
99.5 lbs
Manufacturer
ZF
Manufacturer #
3312002201
Material
Aluminum
Model
45A
Part #
3312002201
Product Type
Boat Transmission, 8 Degree Down Angle
Replaces
ZF 68, 63, HSW630H1
Shipping Dims
20" x 20" x 20"
Shipping Wt
122 lbs
Size
Gear Ratio: 1.3:1
UPC
443590351266
Warranty
2 Year (1 Year Commercial)
Also you can check product : ZF 45A Marine Transmission Hurth HSW450A Gearbox New
ZF / Hurth is one of the largest manufacturers of gearboxes. The company operates a total of 121 production companies in 26 countries different countries. We can deliver a ZF / Hurth ZF 68 gearbox with 2 years warranty. Fully works tested, reliable and simple to install, Compatible with all types of engines and propulsion systems, including waterjets and surface- piercing propellers, as applicable.
- 1
