Search
Search Criteria
Products meeting the search criteria
Our completely redesigned, 1.8-liter F90 Jet Drive outboard produces 65 hp at the pump. Its compact, lightweight SOHC four-cylinder, in-line design features a long-track induction system and Yamaha’s proprietary YDC-30 aluminum alloy. This creates a light, compact, powerful outboard for deck boats and deep-V hulls navigating shallow, rocky rivers, flats and sandbars. Ultra-low emissions: Yamaha jet drive four strokes are California Air Resources Board (C.A.R.B.) Three-Star Rated for Ultra-Low Emissions and meet all federal EPA requirements.
Our Used Yamaha 90HP – 20″ Shaft features greater displacement and a single-overhead-camshaft design with four valves per cylinder. This boosts power and volumetric efficiency and streamlines design. A lighter, more powerful design gives the F90 blistering speed that’s 1.5 mph faster than competing outboards. This model has a powerful and precise Multi-Point Electronic Fuel Injection delivering the exact amount of fuel needed for optimum performance and efficiency. Yamahas EFI optimizes fuel atomization further enhancing fuel economy.
Yamaha F90 Jet Drive Four Stroke Outboard Engine - New (F90)
Our completely redesigned, 1.8-liter F90 Jet Drive outboard produces 65 hp at the pump. Its compact, lightweight SOHC four-cylinder, in-line design features a long-track induction system and Yamaha’s proprietary YDC-30 aluminum alloy. This creates a light, compact, powerful outboard for deck boats and deep-V hulls navigating shallow, rocky rivers, flats and sandbars.
354 pounds (including jet pump assembly)
Fits 25-inch transom boats
Solid 35-amp alternator
Power Trim & Tilt
Features & Benefits
Power and Performance
Fuel Economy
Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
Lightweight, Compact Design
Single or Double Overhead Camshaft platforms provide lighter weight, impressive acceleration and better fuel efficiency.
Incredible Maneuverability
Microcomputer Ignition adjusts timing to maintain optimum engine performance, economy and power under all conditions.
Powerful Hole Shot
The Composite Intake Manifold on Yamaha's Jet Drive F150, F115, F90, F60 and F40 feature long tube intake tracks, tuned to increase airflow. This boosts low-end and midrange torque for a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
Optimum Performance
Microcomputer Ignition adjusts timing to maintain optimum engine performance, economy and power under all conditions.
Convenience and Control
INCREDIBLE MANEUVERABILITY
With no gearcase or propeller extending below the hull, a jet drive allows you to maneuver around or pass over obstructions that would limit the travel of a conventional, propped outboard.
ERGONOMIC CONTROL
Yamaha’s award-winning, Multi-Function Tiller Handle (optional on F115, F90, F60 and F40 jet models) features an ergonomic design for easy shifting , better grip and less rotation from idle to wide-open throttle. This reduces operator fatigue for a full day of enjoyable boating. Truly multi-function, it control features include throttle, throttle friction control, shift lever, key switch, stop switch and a Power Trim & Tilt switch.
EASY ENGINE FLUSHING
A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life.
RELIABILITY & DURABILITY
CORROSION PROTECTION
Combined with our proprietary alloy (YDC-30), our exclusive Phaze Five anti-corrosive paint system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Jet Drive outboards.
SPECS :
Engine
Engine Type
4-cylinder
Displacement
1596cc (97ci)
Bore & Stroke
79x81.4mm (3.11x3.2in)
RPM Range
5000-6000
Compression Ratio
9.6:1
Induction System
DOHC EFI
Alternator Output
25 Amps
Starting
Electric
Ignition
TCI
Lubrication
Wet sump
Degree of Trim/Tilt
-4 degree through 16degree/70degree
Exhaust
Through Jet Pump
Cooling
Water/Thermostatic Control
Gear Shift
F/N/R
Gear Ratio
NA
Fuel & Lubrication
Recommended Fuel
Regular Unleaded (Minimum Pump Octane 87)
Recommended Oil
Yamalube 4-M FC-W 10W-30 or 20W-40
Oil Capacity
4.5L (4.8 qt)
Dimensions
Shaft Length
Fits 25"
Dry Weight
177kg (391lbs)
INCLUDED :
Yamaha 25L Portable Non-EPA Fuel Tank
Yamaha 25L Portable EPA Fuel Tank
Yamaha 12L Portable EPA Fuel Tank
Large Water Separator Filter Element
Engine Flushers
Scepter 25L Portable Non-EPA Fuel Tank
Tank Fitting
10 Micron Fuel/Water Separating Filter Aluminum Assembly
Also you can check product : Yamaha F60 60Hp Jet Drive Four Stroke Outboard Engine - New
354 pounds (including jet pump assembly)
Fits 25-inch transom boats
Solid 35-amp alternator
Power Trim & Tilt
Features & Benefits
Power and Performance
Fuel Economy
Precision Multi-Point Electronic Fuel Injection delivers the exact amount of fuel needed for optimum performance and efficiency. Yamaha’s EFI optimizes fuel atomization further enhancing fuel economy.
Lightweight, Compact Design
Single or Double Overhead Camshaft platforms provide lighter weight, impressive acceleration and better fuel efficiency.
Incredible Maneuverability
Microcomputer Ignition adjusts timing to maintain optimum engine performance, economy and power under all conditions.
Powerful Hole Shot
The Composite Intake Manifold on Yamaha's Jet Drive F150, F115, F90, F60 and F40 feature long tube intake tracks, tuned to increase airflow. This boosts low-end and midrange torque for a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
Optimum Performance
Microcomputer Ignition adjusts timing to maintain optimum engine performance, economy and power under all conditions.
Convenience and Control
INCREDIBLE MANEUVERABILITY
With no gearcase or propeller extending below the hull, a jet drive allows you to maneuver around or pass over obstructions that would limit the travel of a conventional, propped outboard.
ERGONOMIC CONTROL
Yamaha’s award-winning, Multi-Function Tiller Handle (optional on F115, F90, F60 and F40 jet models) features an ergonomic design for easy shifting , better grip and less rotation from idle to wide-open throttle. This reduces operator fatigue for a full day of enjoyable boating. Truly multi-function, it control features include throttle, throttle friction control, shift lever, key switch, stop switch and a Power Trim & Tilt switch.
EASY ENGINE FLUSHING
A Freshwater Flush Device allows you to flush the engine without running it, for added convenience and extended engine life.
RELIABILITY & DURABILITY
CORROSION PROTECTION
Combined with our proprietary alloy (YDC-30), our exclusive Phaze Five anti-corrosive paint system provides a tough, five-layer barrier against corrosion. This protection is standard on all Yamaha Jet Drive outboards.
SPECS :
Engine
Engine Type
4-cylinder
Displacement
1596cc (97ci)
Bore & Stroke
79x81.4mm (3.11x3.2in)
RPM Range
5000-6000
Compression Ratio
9.6:1
Induction System
DOHC EFI
Alternator Output
25 Amps
Starting
Electric
Ignition
TCI
Lubrication
Wet sump
Degree of Trim/Tilt
-4 degree through 16degree/70degree
Exhaust
Through Jet Pump
Cooling
Water/Thermostatic Control
Gear Shift
F/N/R
Gear Ratio
NA
Fuel & Lubrication
Recommended Fuel
Regular Unleaded (Minimum Pump Octane 87)
Recommended Oil
Yamalube 4-M FC-W 10W-30 or 20W-40
Oil Capacity
4.5L (4.8 qt)
Dimensions
Shaft Length
Fits 25"
Dry Weight
177kg (391lbs)
INCLUDED :
Yamaha 25L Portable Non-EPA Fuel Tank
Yamaha 25L Portable EPA Fuel Tank
Yamaha 12L Portable EPA Fuel Tank
Large Water Separator Filter Element
Engine Flushers
Scepter 25L Portable Non-EPA Fuel Tank
Tank Fitting
10 Micron Fuel/Water Separating Filter Aluminum Assembly
Also you can check product : Yamaha F60 60Hp Jet Drive Four Stroke Outboard Engine - New
Our completely redesigned, 1.8-liter F90 Jet Drive outboard produces 65 hp at the pump. Its compact, lightweight SOHC four-cylinder, in-line design features a long-track induction system and Yamaha’s proprietary YDC-30 aluminum alloy. This creates a light, compact, powerful outboard for deck boats and deep-V hulls navigating shallow, rocky rivers, flats and sandbars. Ultra-low emissions: Yamaha jet drive four strokes are California Air Resources Board (C.A.R.B.) Three-Star Rated for Ultra-Low Emissions and meet all federal EPA requirements.
Yamaha F90 90HP 20" Shaft Outboard Motor 2014 Used (F90)
Our Used Yamaha 90HP – 20″ Shaft features greater displacement and a single-overhead-camshaft design with four valves per cylinder. This boosts power and volumetric efficiency and streamlines design. A lighter, more powerful design gives the F90 blistering speed that’s 1.5 mph faster than competing outboards.
This model has a powerful and precise Multi-Point Electronic Fuel Injection delivering the exact amount of fuel needed for optimum performance and efficiency. Yamahas EFI optimizes fuel atomization further enhancing fuel economy.
Power and Performance
Powerful Hole Shot: The Composite Intake Manifold on the F115, F90 and F75 feature long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
Optimum Performance: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
Lightweight, Compact Design: To keep weight down and efficiency up, the F115 has a double overhead camshaft, and the F90 and F75 feature a single overhead camshaft, but still deploy four valves per cylinder. That setup means less mass in the cylinder head and reduced weight for the overall outboard. At the same time, four valves per cylinder means great engine combustion, which contributes to horsepower, torque and fuel efficiency.
Quick Acceleration: The F90 and F75 have stepped up to 1.8-liter displacement, joining their F115 big bro. Meanwhile the 90hp and 75hp have both dropped 13 pounds. Lighter weight and increased volumetric efficiency, plus increased displacement equals thrilling performance and make our 90hp a top performer in acceleration and torque.
Reliability and Durability.
Corrosion Protection: Used Yamaha 90HP – 20″ Shaft is Combined with our proprietary alloy (YDC-30), our highly vaunted, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. Stainless Steel components such as the drive, prop and shift shafts provide an additional layer of critical corrosion protection. And multiple sacrificial anodes throughout the motor provide protection from the elements.
Wet Sump: The F115, F90 and F75 use a pressurized oil delivery system and incorporates a compact and durable oil pump to keep all of the moving parts of their DOHC and SOHC systems lubricated and running smoothly for maximum reliability.
Engine Warning System: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
Keep the Water Out: Updated cowling design incorporates the latest Water Draining Intake Duct. With side intakes and superior water separation function, this outboard is even better suited to take on the marine environment.
Measurably Quieter than Predecessor: Yamaha’s proven labyrinth exhaust system, which gradually expands exhaust gases through a labyrinth, greatly suppresses engine noise at low to medium speeds. Updates to the muffler have greatly reduced noise at higher than midrange speeds.
Convenience and Control.
Multi-Function Tiller Handle: The F115 and all-new F90 and F75 are compatible with Yamaha’s award winning Multi-Function Tiller Handle. It incorporates engine start/stop, emergency stop, gear shift, power trim and tilt operation, variable trolling switch, warning and controls all in one.
Charging Power: The F115, F90 and F75 feature three-phase alternators that produce up to 35 amps of power. For the 90 and 75 hp, that’s 40 percent more output than previous designs, and for the 115, it’s more than 45 percent more charging power. That’s plenty of electrical power for battery charging and accessories, with more to spare.
Variable Trolling: The F115, F90 and F75 feature Yamaha’s Variable Trolling RPM Switch (VTS®). This allows for precision adjustment of trolling speeds in 50-RPM increments, from 650 to 900 RPM for the 115 hp, and 550 to 1000 RPM for the 90 and 75 hp. It even allows for sub-idle trolling. This is a major plus for anglers.
Extended Engine Life: Used Yamaha 90HP – 20″ Shaft has a Freshwater Flush Device allows you to flush the engine without starting it, for maximum convenience, durability and engine life.
General Information
Prop shaft Horsepower
90 HP at 5500 RPM
Full Throttle Operating Range
5000 ~ 6000 RPM
Gear Ratio / Shift
2.15:1 / Forward, Neutral, Reverse
Fuel Induction
EFI
Alternator
35 Amp
Engine
Engine Type
Inline 4
Bore x Stroke
3.19 x 3.5 in. (81 x 88.9 mm)
Displacement
1.8 L
Starting
Electric
Dimensions
Shaft Length
20 in
Weight
53 lb. (160 kg)
Model Specific Features
Available for mechanical remote or tiller control
Only 353 pounds
Available in 20” shafts
Powerful 35-amp alternator
Optional Variable Trolling RPM via the Command Link tachometer
Specifications
Engine Type
Inline 4
Displacement
1.8L
Bore x Stroke
81 x 88.9mm (3.19 x 3.5 in)
Prop Shaft Horsepower
90hp @ 5500 rpm
Full Throttle RPM Range
5000 ~ 6000
Alternator Output at W.O.T
35 Amp
Compression Ratio
10.0:1
Fuel Induction System
EFI
Weight
160kg (353 lbs)
Fuel
Octane 87
Engine Oil
Yamalube 4M (See owner’s manual)
Fuel Filtration
Yamaha 10-Micron Fuel/Water Separating Filter (external)
C.A.R.B. Rating
3-Star
Exhaust
Through Propeller
Intake
16
Ignition
TCI Microcomputer
Spark Plug
LFR6A-11
Alternator Output
35 Amp
Starting System
Electric
Lubrication
Wet Sump
Engine Oil Capacity
3.2/3.0L
Recommended Cooling
Thermostatic Control
Ethanol Blend Limit
10% Maximum
Gear Ratio
2.15:1
Gear Shift
Forward, Neutral, Reverse
Shaft Length
20″
Degree of Tilt
70
Degree of Trim
-4 Degree through 66 Degree
Dry Weight
160kg (353 lbs)
Mounting Centers
26″
Steering Angle (maximum)
35° from center, either direction
Also you can check product : Yamaha F40 FETL 40 HP Long Shaft Outboard Motor Used
This model has a powerful and precise Multi-Point Electronic Fuel Injection delivering the exact amount of fuel needed for optimum performance and efficiency. Yamahas EFI optimizes fuel atomization further enhancing fuel economy.
Power and Performance
Powerful Hole Shot: The Composite Intake Manifold on the F115, F90 and F75 feature long tube intake tracks, tuned to increase airflow, which boost low-end and midrange torque. This means a more powerful hole shot and increased acceleration. Even with all this responsive power, an air silencer box and surge tank reduce air intake noise and air turbulence for smooth, quiet operation.
Optimum Performance: A TCI microcomputer ignition adjusts timing to maintain optimal engine performance, economy and power under all operating conditions.
Lightweight, Compact Design: To keep weight down and efficiency up, the F115 has a double overhead camshaft, and the F90 and F75 feature a single overhead camshaft, but still deploy four valves per cylinder. That setup means less mass in the cylinder head and reduced weight for the overall outboard. At the same time, four valves per cylinder means great engine combustion, which contributes to horsepower, torque and fuel efficiency.
Quick Acceleration: The F90 and F75 have stepped up to 1.8-liter displacement, joining their F115 big bro. Meanwhile the 90hp and 75hp have both dropped 13 pounds. Lighter weight and increased volumetric efficiency, plus increased displacement equals thrilling performance and make our 90hp a top performer in acceleration and torque.
Reliability and Durability.
Corrosion Protection: Used Yamaha 90HP – 20″ Shaft is Combined with our proprietary alloy (YDC-30), our highly vaunted, anti-corrosive paint system provides a tough, five-layer barrier against corrosion. Stainless Steel components such as the drive, prop and shift shafts provide an additional layer of critical corrosion protection. And multiple sacrificial anodes throughout the motor provide protection from the elements.
Wet Sump: The F115, F90 and F75 use a pressurized oil delivery system and incorporates a compact and durable oil pump to keep all of the moving parts of their DOHC and SOHC systems lubricated and running smoothly for maximum reliability.
Engine Warning System: This system protects the outboard with a range of functions including: overheat protection and low-oil-pressure warning (automatically reducing maximum RPM to 2000), over-rev protection, water-in-fuel detection, start-in-gear protection and shift-in prevention at open throttle.
Keep the Water Out: Updated cowling design incorporates the latest Water Draining Intake Duct. With side intakes and superior water separation function, this outboard is even better suited to take on the marine environment.
Measurably Quieter than Predecessor: Yamaha’s proven labyrinth exhaust system, which gradually expands exhaust gases through a labyrinth, greatly suppresses engine noise at low to medium speeds. Updates to the muffler have greatly reduced noise at higher than midrange speeds.
Convenience and Control.
Multi-Function Tiller Handle: The F115 and all-new F90 and F75 are compatible with Yamaha’s award winning Multi-Function Tiller Handle. It incorporates engine start/stop, emergency stop, gear shift, power trim and tilt operation, variable trolling switch, warning and controls all in one.
Charging Power: The F115, F90 and F75 feature three-phase alternators that produce up to 35 amps of power. For the 90 and 75 hp, that’s 40 percent more output than previous designs, and for the 115, it’s more than 45 percent more charging power. That’s plenty of electrical power for battery charging and accessories, with more to spare.
Variable Trolling: The F115, F90 and F75 feature Yamaha’s Variable Trolling RPM Switch (VTS®). This allows for precision adjustment of trolling speeds in 50-RPM increments, from 650 to 900 RPM for the 115 hp, and 550 to 1000 RPM for the 90 and 75 hp. It even allows for sub-idle trolling. This is a major plus for anglers.
Extended Engine Life: Used Yamaha 90HP – 20″ Shaft has a Freshwater Flush Device allows you to flush the engine without starting it, for maximum convenience, durability and engine life.
General Information
Prop shaft Horsepower
90 HP at 5500 RPM
Full Throttle Operating Range
5000 ~ 6000 RPM
Gear Ratio / Shift
2.15:1 / Forward, Neutral, Reverse
Fuel Induction
EFI
Alternator
35 Amp
Engine
Engine Type
Inline 4
Bore x Stroke
3.19 x 3.5 in. (81 x 88.9 mm)
Displacement
1.8 L
Starting
Electric
Dimensions
Shaft Length
20 in
Weight
53 lb. (160 kg)
Model Specific Features
Available for mechanical remote or tiller control
Only 353 pounds
Available in 20” shafts
Powerful 35-amp alternator
Optional Variable Trolling RPM via the Command Link tachometer
Specifications
Engine Type
Inline 4
Displacement
1.8L
Bore x Stroke
81 x 88.9mm (3.19 x 3.5 in)
Prop Shaft Horsepower
90hp @ 5500 rpm
Full Throttle RPM Range
5000 ~ 6000
Alternator Output at W.O.T
35 Amp
Compression Ratio
10.0:1
Fuel Induction System
EFI
Weight
160kg (353 lbs)
Fuel
Octane 87
Engine Oil
Yamalube 4M (See owner’s manual)
Fuel Filtration
Yamaha 10-Micron Fuel/Water Separating Filter (external)
C.A.R.B. Rating
3-Star
Exhaust
Through Propeller
Intake
16
Ignition
TCI Microcomputer
Spark Plug
LFR6A-11
Alternator Output
35 Amp
Starting System
Electric
Lubrication
Wet Sump
Engine Oil Capacity
3.2/3.0L
Recommended Cooling
Thermostatic Control
Ethanol Blend Limit
10% Maximum
Gear Ratio
2.15:1
Gear Shift
Forward, Neutral, Reverse
Shaft Length
20″
Degree of Tilt
70
Degree of Trim
-4 Degree through 66 Degree
Dry Weight
160kg (353 lbs)
Mounting Centers
26″
Steering Angle (maximum)
35° from center, either direction
Also you can check product : Yamaha F40 FETL 40 HP Long Shaft Outboard Motor Used
Our Used Yamaha 90HP – 20″ Shaft features greater displacement and a single-overhead-camshaft design with four valves per cylinder. This boosts power and volumetric efficiency and streamlines design. A lighter, more powerful design gives the F90 blistering speed that’s 1.5 mph faster than competing outboards. This model has a powerful and precise Multi-Point Electronic Fuel Injection delivering the exact amount of fuel needed for optimum performance and efficiency. Yamahas EFI optimizes fuel atomization further enhancing fuel economy.
- 1